Industrial Grease

Product Details:

Compressor Oils:

Omnilube® 520, 546, 568, 5131 and 640.- These oils are ISO VG 32 through 150 Hi food grade oils for use in a wide variety of rotary screw, rotary vane, and reciprocating compressors and vacuum pumps. Recommended change-out intervals are 2,000 to 4,000 hours.

Omnilube® 32/46, 68 and 455are novel, recently developed rotary screw and reciprocating air compressor lubricants with greatly improved wear, oxidation and lubricity vs. currently available H-1 food grade synthetic lubricants. These lubricants were designed with a proprietary additive package, are registered with NSF and meet USDA H-1 requirements. Field tests have shown these lubricants to outlast other synthetic H-1 lubricants by 50%to 100%.

Multipurpose Hydraulic Oils:

Omnilube® FGH 1000 Series Multi-Purpose Hydraulic Oils.-These oils are suitable for hydraulic systems, bearings, oven chains, canning applications, and valves.

Omnilube® FGH 2000 Series High Load AW Multi-Purpose Hydraulic Oils. - These premium quality oils are intended for use where longer oil change intervals or more extreme duty cycles require a longer lasting, heavier duty product.

Gear Oils:

Omnilube® FGG 1000 Gear Oil Series. - These oils are suitable for use in gear sets, worm gears, bearings and as chain lubricants.

Omnilube® FGG 2000 Severe Load Gear Oil Series. - These premium quality oils are intended for use in more severely loaded applications than the 1000 Gear Oil Series.

Grease:

Omnilube® FGM2 Grease-This multi-purpose PAO based calcium complex sulfonate grease offers outstanding performance in a wide variety of applications including use in wheel bearings and as chassis lubrication.

Chain Lubricants:

Omnilube® PG-130-FGChain Lubricant - This H-1 food grade polyalkylene glycol based chain oil is designed for use on chains where higher temperatures areexpected. It will not leave deposits associated with some other oils.

Omnilube® PG-220 FG Chain Lubricant. - This H-1 food grade polyalkylene glycol based chain oil is designed for use on chains where higher temperatures areexpected. It will not leave deposits associated with some other oils.

 

 

Product Details:

Product DescriptionIT-9212 is a silicone based heat sink compound is designed to improve thermal flow and conduct away heat. Used as a thermal transfer media for facilitating dissipation of heat between power components, the paste forms heat conducting layer on electronic instruments like transistors, diodes etc. The product features outstanding thermal conductivity and exhibits an excellent resistance against chemicals. It is non-toxic and compatible with most plastics. The compound has very high oxidation stability and resists temperature. It shows a minimal oil separation.
Additional Information

Product Details:

CORATEX is a purging emulsion for plastics processing machines. It is primarily used for

colour- and material changes, in preparation of preventive maintenance programs, for the
removal of polymer degradation (“black specks”) and during machine start-up after closing
down. It will give outstanding cleaning results on all relevant components such as screws
and barrels, including heads and dies of extruders and nozzles, hotrunner tooling of injection
moulding machines.

Additional Information:

• Delivery Time: Ex Stock

Product Details:

                                 

Product Details:

Product Description

Krytox 240 series greases are white, buttery greases with all of the same properties as the 143 series oils that they are made from, but they are in grease form. The 240AZ, 240AB and240AC met MIL-PRF-27617 general specifications. Many of the other 240 series products meet other specifications for individual applications.

Product Details:

We are importer of fine quality Krytox Lubricants. we offer entire range of Krytox lubricants of Chemour . It includes High temp greases and Gear oils

Features:

• High oxidation stability
• High drop point
• Temper-proof packaging

Product Details:

IT-4360 is a multi-purpose premium polyalphaolefin (PAO)-based grease designedfor use in a wide variety of industrial applications where regulations specify H1grease for “incidental food contact”.IT-4360 provides equipment protection and performance characteristics expected in apremium quality synthetic grease. This premium grease provides long life, wideoperating temperature range, very high load carrying capacity, excellent waterwashout, and anti-corrosion properties. The grease is designed for use in all types offood machinery, anti-friction bearings, low to medium speed industrial bearings, slideways and enclosed gears

Product Details:

Product Description

Additional Information:

• Ageing-stable high-performance grease with MoS.

 

Use:

• Especially developed for use in gear drive shaft/clutch disc-hub (automotive).
• For all kinds of roller and sliding bearings with slow and/or oscillating movements
• under heavy conditions.
• For lubrication of keyway profiles and threaded spindles.

 

Properties:

• Universal in use
• Reduces wear and tear
• Extended relubrication cycles
• Outstanding emergency running characteristics
• Applicable for almost all bearing types
• Extreme load and shock resistant

Product Details:

A assembly paste based on molybdenum disulphide for priming of heavy duty bearings, machine guide-ways, lead screws or other similar applications which are also exposed to heat and load. Used as a lubricant for press-fitting of machine components or as an anti-seize compound for threaded connections exposed to acidic and alkaline atmospheres.Service temperature range:      - 35 °C  up to + 450 °C

Product Details:

IT-4107 is premium food grade silicone valve & packing grease formulated with high quality Phenyl Methyl silicone oils and thickeners. It is adherent and provides excellent sealing properties. In comparison to conventional PDMS silicone oils, IT-4107 has much higher thermal stability and remains stable at temperatures > 250°C (open system) & 300°C closed system.The grease is designed for use as a sealing grease in autoclaves in pharma industries, valves in hot and cold water lines & for valves in the chemical industry.

Product Details:

Product DescriptionIT-4120 exhibits unique high temperature stability, low internal friction and an excellent low temperature pumpability with low starting and running torque. The lubricant has excellent adhesion, structural stability and resistance to water. The greases have a high level of chemical stability and are formulated with special additive combinations to provide excellent protection against wear, rust and corrosion at high and low temperatures. The lubricant is compatible to most plastics and suitable for use for plastic-plastic and plastic-metal component combinations.

Product Details:

                                      

Product Details:

Product DescriptionIT-4311 is high temperature grease designed for use of high temperature bearings and sliding parts exposed to high temperature and heavy loads at slow and moderate speeds. The grease has a service temperature range of - 30 up to + 200 °C and is used for lubrication of trolley bearings, conveyor bearings; calendar rolls bearings, induced draft fans or drier bearings etc. It exhibits and excellent resistance to heat & shows a good mechanical, oxidation stability. It maintains a constant consistency over its operating temperature range and resists water washout.

Product Details:

                                       

Product Details:

Product DescriptionIT-4306 is an outstanding heat stable, long life, synthetic non-melting greases which exhibits superior high temperature stability. Traditional applications include it use on conveyors, ovens, electric motors & other high temperature processing equipment. Made from the most thermally stable synthetic oil. IT-4306 out-performs in areas where other synthetic greases fail. The lubricant has an excellent thermal stability & provides longest life with a useful temperature range of -40° to 235 °C +. It exhibits outstanding oxidation stability, no deposits & very low evaporation rate. The grease will not form coke, sludge, or varnish within its useful temperature range. It has a low bleed rate for durability & is non-melting dropping point over 260 °C.

Product Details:

                IT-4112 grease is a synthetic oil-based, Lithium hydroxystearate soap thickened with PTFE. Tenacious & adhesive grease by design, the lubricant has good compatibility with plastics and offers a wide service temperature range. The grease has low friction co-efficient and low noise performance and a service temperature range of - 60 to + 120°C. The lubricant is designed for use for plastic-plastic or plastic-steel components, for lubrication of pneumatic cylinder seals & ‘O’ rings. It is also used for enclosed gear-boxes & actuators or as a lubricant for automotive switches.

Additional Information:

• Item Code: IT-4112

                  

Product Details:

Product DescriptionIT-4305 is a mineral oil based extreme pressure multi-use grease for lubrication of the ball and rolling bearings, hinges etc. Using select additives which impart exceptional load carrying abilities, the grease is formulated to resist high shock loads and has high lubricating properties which results in extended cycling times and cost reduction. It exhibits excellent adherence to the metal surface, a good pumpability& lubricity and resists water. The lubricant provides excellent rust and oxidation properties. Proven extreme pressure additives ensures maximum protection against shock loads with reduced metal to metal contact and hence minimal wear on moving parts which results in reduction of maintenance costs.

Product Details:

Product Description

As an affluent supplier in the functional domain, we are betrothed in offering our clients superior quality IT-4317 High Temperature Synthetic Polyurea Grease. The offered greases are processed using finest quality raw material and advanced technology under the strict supervision of our vendors’ adroit professionals. Ideal for protecting machine parts from rust and provides smooth functioning, we offer these greases in various packaging options at market leading rates.

Features:

• Optimum viscosity
• High lubricity
• Higher melting point

Product Description:

Problem:
Bearings fail prematurely; frequent lubrication and costly maintenance.

Solution:
Use IT-4311. This grease formulation is based on synthetic stocks and stable thickeners. Longer re-lubrication intervals can be achieved. The greases are extremely stable at high temperature and protect against wear.

Product Details:

Product DescriptionIT-4108 is premium High vacuum silicone valve & packing grease formulated with high quality silicone oils and thickeners. Extremely adherent, this grease is resistant to water and provides excellent sealing properties. The grease is designed for lubrication of ground connections parts of industrial vacuum plants, laboratory equipment, shutoff valves and taps etc. It is resistant to heat with no carbonizing & melting. Its vapor pressure remains negligible up to 200 oC & maintains its consistency between -40 ^oC and + 200 ^oC. The product exhibits chemical inertness with no corrosive effect on metals & is neutral to most elastomers & rubbers with plasticizing effect on rubber and plastics. It is also resistant to solvents. The grease is non-toxic, neutral to plastics, rubbers, and ‘0’ rings. The consistency does not change much over a wide range of temperatures. The grease is resistant to many chemicals including acetone, glycerin, ethylene-glycol, ethanol and methanol etc.

Product Details:

Product DescriptionIT-4109 is premium quality to be used under a wide range of temperature conditions for light-load applications where there is metal-to-metal or metal-to-plastic friction at low to high speeds and at low temperatures. The grease is designed for use on valves operating at very low temperatures, in roller and conveyer equipment, control cables, Bowden cables, electric motors, photographic equipment, optical equipment, measurement equipment etc. It is also used for lubrication between rubber and metal parts in pneumatic systems, for lubrication of ‘O’ rings.& other general industrial applications. The lubricant has a wide temperature range, a high chemical inertness & no corrosive effect on metals. It is neutral to most elastomers & rubbers; no plasticizing effect on rubber and plastics. Resistant to solvents, it also provides a good corrosion protection.
Additional Information

Product Details:

Product Description

IT-3105 Lithium Complex Moly Grease is a high quality multipurpose lithium soap E.P Grease containing solid lubricants, MoS2 and other highly efficient extreme pressure additives. Designed for long-term lubrication, it is well suited for plain and anti-friction bearings as well as other grease-lubricated machine elements.

 

The additive used in the grease provides good corrosion protection and water wash out properties. Under load, and when boundary lubricating conditions prevail, film containing MoS2 is deposited from the grease to the sliding surfaces making available emergency lubrication. Special ant-wear additives prevent metal-to-metal contact at high loads reducing the coefficient of friction and minimizing wear. It markedly improves running-in conditions. Some examples of application are its use for plain bearings and guides, joints and splined shafts, threaded spindles and small gear units at low speeds or bearings subject to severe impact loads or exposed to extreme atmospheric conditions. It is also used for lubrication of clutch bearings, fan bearings, electric motors bearings. These are recommended for the use in generator bearings, universal joints bearing, journal bearings, heavy loaded bearings in the shovel and similar other applications in the earth moving equipment. IT-3105 is available is 1 Kg, 5 Kgs & 25 Kgs containers in various consistencies

Product Details:

Product DescriptionIT-9205 is a Light-colored adhesive grease-paste with solid lubricants designed esp. to prevent fretting corrosion on the Chucks.

 

Product Details:

IT-4304 is synthetic base grease with low inner friction for the lubrication of electrical contacts. The grease is also ideal for use of the heavily loaded plain bearings with metal-to-plastic or metal-to-elastomeric-contact. It protects from corrosion and reduces friction and wear on mechanisms operating under normal to higher load and /or speed. It also improves the sliding ability of plastics, elastomers and above all of non-ferrous metals. The grease is designed to prolong the lifetime of static and dynamic rubber seals. Typically used as a conducting media in the seam welding machines, the lubricant improves sliding ability and operational reliability of metal-to-plastic or metal-to-elastomeric-contacts. Other applications of the grease are its use as an assembly aid for O-rings, labyrinth seals, sleeves and other seals from rubber material such as used in hydraulic brake systems in motor vehicles, as well as contact lubricant for switches such as used in electrical equipment. The lubricant has good oxidation stability and ageing resistance. It is stable to temperature and has a high load carrying capability.

Product Details:

Product Description

Additional Information:

• Special grease for electrical contacts, switches and sensors

Use:

• Successfully used for lubrication of plastic/plastic friction pairings like in small gears of electric tooth brushes.

• For lubrication and contact protection of electronic components e.g. in the automotive industry & installation technology.

• Typical applications: power and control power switches,PCB`s and potentiometers.

Properties:

• Reduces wear and tear
• Excellent corrosion protection
• Extremely water repellent
• Improves contact making
• To a large extent compatible with plastics
• Avoids spark formation
• Resistant to oxidation and ageing

Product Details:

IT-4329 is a long-lasting non-reactive, non-flammable, inert lubricant designed for use on equipment exposed to high pressure reactive chemicals and reactive gasses. It is compatible with oxygen and other reactive chemicals and is also compatible with polymers used in seals, O-rings and valves.A superior film-forming ability allows this lubricant to provide a thick oil layer that reduces friction and wear, extending equipment life in severe duty applications. The non-oxidizing nature of the base oil makes the grease last longer. The lubricant is thickened with a unique polytetrafluoroethylene (PTFE) that has a melting point of 325 °C Service temperature range:   - 15 up to + 325 °CConsistency   NLGI grade 1.5