Fire Extinguisher

Product Details:

Product DescriptionWe provide a wide range of fire hydrant stand Fire Hydrant Stand Post / Under Ground As Per IS:908/909 , which are actively used in fire protection measures. ... These are available with single headed and double headed features in order to mount two single head hydrant valves.

Product Details:

Product Details :

• Methods of operationRemove safety pin from the wheel of the co2 cylinder
• Turn the wheel of co2,cylinder of anti clock wise direction
• Hold the Nozzle and direct the of foam to basis of fire in sweepng motionmotion.
• Turn the wheel of c02 cylinder of  clock wise direction after  after the use

After the useMaintenance

After the discharge the extinguisher must be washed out carefully with fresh water
Do not use on live electrical fire

Product Details:

Fyrex ABC Dry powder fire extinguishers are filled with high quality multipurpose ABC Powder agent, which is a combination of High-Qualityraw material monoammonium phosphate & additives, entirely meet all current national and international requirements in terms of design,manufacturing method, quality control and their technical characteristics.
As with all of the larger portable FireExtinguishers, you should consider whether the wallconstruction is adequate to withstand the weight ofthe appliance. Extinguisher stands should beconsidered for cavity wall applications.

Features:-

• CE Approved Brass chrome plated valve with TP 42 bar with inbuilt UGTS mechanism & safety release device in valve
• CE Approved Pressure Gauge approved by APRAGAZ and MPA Dresden
• Large Loop SS Pull Pin
• Anti Corrosive treatment on cylinders
• Aluminium Siphon tube
• Gates Corporation USA, manufactured hose pipe (Temp range of -32°C to +82°C, WP 21Kg/cm2 & BP 84 Kg/cm2)
• External & Internal Pure Polyester Powder Coating (Lead free paint and UV resistant)
• High Quality PVC Dome
• Pressurized by UHP Grade Nitrogen
• Colour coded tampers seal
• TP- Tested Pressure
• WP- Working Pressure
• BP- Burst Pressure

 

 

 

Product Details:

Fyrex CO2 fire extinguisher (PESO approved cylinder as per IS 7285) is highly pressurized with carbon dioxide, which is a non-flammableinert gas. CO2 gas extinguishes fire by smothering method and if applied correctly, it reduces the oxygen content in the air around the fuel tobelow that required for combustion to take place. It is non-conductor of electricity and suitable for use on fires where electrical systems maystill be under power.In view of Continual Improvement in Product Preformance, the specifications are subject to change without prior notice.The Product image are for representation purpose only. The Actual Product may differ from the images shown.

Features:-

• 99.95% Pure Carbon Di Oxide gas
• High Quality enamel Paint
• High pressure Wire Braided Hose
• Brass Valve of Wheel Type with pressure relieve disc confirms to IS: 3224
• Shells are hydro tested to 250 Bar
• PESO/CCOE approved cylinder body and confirms to IS: 7285
• Carbon dioxide is a gaseous agent, colourless, odorless / non-toxic and provides rapid knock down of industrial fire.
• Swivel Horn with no freeze burn, with greater directional control of CO2 discharge through horn rotation feature.
• CO2 gas disappears quickly leaving no residue.

Product Details:

Fyrex BC Dry powder fire extinguishers are filled with high quality BC powder agent, which are formulated with high-quality raw materialsodium bicarbonate/potassium bicarbonate & additives, entirely meet all the current national and international requirements in terms ofdesign, manufacturing method, quality control and their technical characteristics.
As with all of the larger portable FireExtinguishers, you should consider whether the wallconstruction is adequate to withstand the weight ofthe appliance. Extinguisher stands should beconsidered for cavity wall applications.

Features:-

• CE Approved Brass chrome plated valve with TP 42 bar with inbuilt UGTS mechanism & safety release device in valve
• CE Approved Pressure Gauge approved by APRAGAZ and MPA Dresden
• Large Loop SS Pull Pin
• Anti Corrosive treatment on cylinders
• Aluminium Siphon tube
• Gates Corporation USA, manufactured hose pipe (Temp range of -32°C to +82°C, WP 21Kg/cm2 & BP 84 Kg/cm2)
• External & Internal Pure Polyester Powder Coating (Lead free paint and UV resistant)
• High Quality PVC Dome
• Pressurized by UHP Grade Nitrogen
• Colour coded tampers seal
• TP- Tested Pressure
• WP- Working Pressure
• BP- Burst Pressure