CROSS NET

Product Details:

IT-4326 is mineral oil based high temperature Polyurea thickened grease designed for use inbearings exposed to wide temperature range & severe conditions like water load and speedetc. The lubricant is designed for long-term lubrication at high operating temperatures andhigh loads (e.g. vibrations) and esp. designed for highly loaded plain and rolling bearings,joints, slides, hinges and guiding in rolling mills, iron and steel works as well as for machinesand plants in all industrial areas. Suitable for use in drum bearings in continuous wood panelpresses.Service temperature range: - 20 up to + 180°C (short term till 200 OC)Consistency NLGI grade 1

Product Details:

For all friction pairings plastic/plastic resp. plastic/metal in appliances, small gears and adjustment mechanisms. Lubrication of micro bearings in precision Instruments, fans and motors. Typical applications in the automotive industry include its use for Window lifter, sliding roofs, seat adjuster, Bowden cables etc.Service temperature range: - 60 to + 130°C

Product Details:

A high temperature food-grade & inert lubricant designed for rolling and plain bearings in circle conveyors, waffle/wafer biscuit oven conveyors, turn-table bearings, hot gas blower fan bearings etc. IT-4314 offers extended re-lubrication cycles and longer equipment life compared to other lubricant technologies. It will not oxidize or form carbonaceous deposits. It is non-toxic, nonflammable, and chemically inert. The lubricant is cost-effective lubricant, helping to reduce labor-intensive maintenance and equipment downtime due to component failure. IT-4314 is also compatible with most metals, elastomers, and plastics.Service temperature range:   - 30 up to + 300 °C

Product Details:

IT-1085 is a dry lubricating bonded coating that is designed for lubrication of the sliding surfaces operating in dirty/dusty atmospheres. It is also used for lubrication of coarse chains and guide ways operating under high loads and exposed to high temperatures or as a lubricant for highly stressed joints with slow sliding speeds and/or oscillating movements.

Product Details:

Product DescriptionIT-1098  Motorcycles are high-speed applications that operate in tough conditions like rain, dirt, sand, and high shock loads. These specially developed chains are used as the part of the drive train to transmit the motor power to the back wheel. The chain must never be run dry. Lubricating the chain regularly prolongs its life. IT-1098 is based on synthetic oils containing oil soluble organo-moly compounds. It goes on to wet to penetrate parts deeply, setting up an adhesive lubricating coating that does not fling-off at high speeds. The protective coating set up on the outer of the chains protects against the corrosion and weathering effects.

Product Details:

Designed for all kinds of chain, joints,bearings, seals up to 250c. Other applications include its use on cahin & wire rope drives at brick works, glass and ceramic industries, steel work, tube manufacturing plants bakeries etc.

Product Details:

IT-1090 is a waxy coating designed for protection of the finely machined metal surfaces such as tools, dies, molds, including plastic injection molds, spare parts, machines etc. against corrosion during storage and transport. This coating also protects under tropical climate and marine conditions. Product features include its ease of application & removal. The film deposited is thin and dry which is also lubricating. It is ideal for components where markings must remain visible or those where coated parts are to be welded or assembled directly without any preparation. The coating can also be applied over painted surfaces also. The product does not harm rubber and plastics.

Product Details:

IT-1089 Cleaner And Degreaser Spray is a precision cleaner spray for cleaning and degreasing of the metal surfaces. It cleans quickly & effectively & guarantees absolutely clean surfaces.

The cleaner evaporates without leaving any residues and is free CFC & CHC’s. It is an ideal cleaner for de-greasing metal surfaces before surface treatment.

Product Details:

IT-1091 is a wet, thin-film thixotropic coating designed for protection of the finely machined metal surfaces such as tools, dies, molds, including plastic injection molds, spare parts, machines etc. against corrosion during storage and transport. This coating also protects under tropical climate and marine conditions. Product features include its ease of application & removal. The film deposited is thin coating which is removable and also lubricating. It is ideal for components where markings must remain visible or those where coated parts are to be welded or assembled directly without any preparation. Traditionally used for preservation of the plastic injection molds, some of its other applications include its use for protection of engineering components exposed to high corrosive loading, e.g. outdoor weathering under roofs of semi-finished products, finished products etc. up to 2 years. It is an excellent choice for use on shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions. After application, it forms a transparent, oily protective film that will not run off and also adheres well to vertical surfaces.

Product Details:

Product DescriptionIT-1088 is a flexible coating specially formulated for use on electrical equipment. It protects against moisture and corrosion. It possesses high arc-resistance and insulating properties. It is successfully used in applications that range from class 105 to 220. The product penetrates thoroughly and forms a tough, flexible film which has a high arc resistance and non-tracking properties. The coating resists oil, water, acids and alkalis & has an excellent adhesion. It is oil resistant & can be thinned with low cost solvents. The coating is used for motor, stator, coil and transformer impregnation. controller shafts, finger blocks, switch bases, and other electrical insulation, switch parts (porcelain molded compound, etc.) It is also used for field coils, windings and machine frames, inside motor frames, commutator parts, collector rings, enameled wire coils. For sealing oil lines, air lines, threaded pipe joints, transformer drain taps, gaskets, etc.

Product Details:

IT-9204 Nickel Based Anti Seize Compound Paste is formulated to work at places where there is exposure to extreme high temperatures.

It is used where use of copper based compounds is not desirable. Typical examples of application are in boiler plants & its mounted assemblies, for assembly of screw joints subject to high temperature and corrosive environment e.g. at internal combustion engines, threaded connections on pipes, flanges and armatures, exhausts and combustion chambers, bolts for gas and oil burning equipment or as a parting lubrication on metals allergic to seizing e.g. high alloy steels.

The paste exhibits a very high temperature range, it is highly efficient against corrosion, suppresses stick-slip and prevents seizure and scoring & facilitates easy dismantling. It reduces formation of fretting corrosion.

Product Details:

IT-4303 is synthetic base high speed grease designed for the roller bearings operating at high speeds. It is suitable for both horizontally and vertically mounted textile bearings. The lubricant exhibits low internal friction & resists oil separation at high speeds. It does not get thrown off at high speeds

Product Details:

IT-4315 is a high speed, low temperature grease is made from synthetic oils with low dynamic viscosity and high stability at high shear speeds. It provides a wide temperature resistance also protects against water. This grease contains anti-oxidant and anti-wear additives, together with corrosion inhibitors. The properties of IT-4315 make it a high-performance, long-lasting grease for lubrication of ball, roller or smooth bearings exposed to low temperatures or very high speeds, while presenting low torque resistance (electric motors, machine tool spindles, gearboxes, mechanical elements for aeronautical, space or precision applications). It is especially recommended in the presence of risks involving the inclusion of water or cutting liquids, or the presence of condensation.

Additional Information:

• Item Code: IT-4315

Product Details:

IT-4317 is synthetic oil based high temperature polyurea thickened grease designed for use in bearings exposed to wide temperature range & server condition like water load and speed etc.

 

Product Details:

IT-4316 is high temperature grease designed for use of high temperature bearings and sliding parts exposed to high temperature and heavy loads at moderate speeds. It is used for lubrication of all kinds of rolling and plain bearings working under heavy loads. Some examples of application are: tar mixing plants, foundry ladles, hot air ventilators, shaking screens, sintering plants etc. The grease, with the service temperature range of - 25 up to + 160°C is adhesive and offers emergency running characteristics protecting the bearings against wear.

Product Details:

IT-2591 is a high performance thixotropic anti-corrosion protective coating. The protective film, after solvent evaporation, is highly resistant to high humidity and salt atmospheres. The product is designed for protection of semi-finished and finished machines and components, tools, spares, bearings, shafts, moving parts, spindles, etc. during storage and transport, even in extreme weather like coastal and marine atmospheres. Protects plastic injection moulds used to manufacture precision electronic components.

Product Details:

IT-1083 Adherent, colorless belt dressing spray. It stops squeaks & gives an instant grip. Its no-stick formula helps preserve belts and it is designed to meet belt manufacturers' guidelines for all flat-ribbed and V-belts.

Product Details:

IT-1087 is a fast evaporating cleaner spray for removal of baked-on grease, oils and grime for electromechanical assemblies, and a broad range of other equipment and parts. Non-corrosive and residue free, the easy to use aerosol removes carbon, grease, oils and varnish with a penetrating formulation that is safe on sensitive metals.

Product Details:

IT-4333 is mineral oil based high temperature Polyurea thickened grease designed for use in bearings exposed to wide temperature range & severe conditions like water load and speed etc. The lubricant is designed for long-term lubrication at high operating temperatures and high loads (e.g. vibrations) and esp. designed for highly loaded plain and rolling bearings, joints, slides, hinges and guiding in rolling mills, iron and steel works as well as for machines and plants in all industrial areas. Suitable for use in drum bearings in continuous wood panel presses. Service temperature range:   - 20 up to + 180 °C (short term till 200 oC)Consistency   NLGI grade 2

Product Details:

IT-3309 is a premium synthetic grease formulated with PAO base and lithium Soap thickener & designed for use for lubrication of multi-metal-plastic components. It is adherent and adhesive, provides excellent dampening and sealing properties.Typical applications include its use in automotive parts, precision equipment, office equipments and electrical appliances.

Product Details:

A synthetic multipurpose grease with low internal friction, IT-4118 is designed for lubrication of roller and plain bearings, miniature bearings and needle bearings subjected to high speeds or low driving force. It is compatible to most plastics and therefore suitable for plastics-to-plastics contacts.To reduce friction and wear on mechanisms and to protect these from stick-slip. For-life lubrication of frictional partners with metal-to-plastic or plastic-to-plastic contact as in the electrical contactors and switching devices